Skip to content
prefabricatedhouse.de

Space capsule tiny house 2026: prices, images and floor plan

A space capsule tiny house – also called a capsule house or capsule dwelling – is a factory-prefabricated capsule living unit in a futuristic spaceship design, delivered ready to the installation site. Currently only the Slovak manufacturer Ecocapsule quotes public EUR prices: from approx. €55,000 for the 25 m² Box Classic, plus transport, foundation or pitch and utility connections. We show views, floor plan and interior of a typical capsule and objectively classify the documented footprints of around 8 to 38 m² as well as the cost factors.

Price range 2026From approx. €55,000 plus incidental costs
Delivery & installationoften within a few days

Space Capsule Tiny House quotes from your region – put together in 20 seconds

Answer 4 short questions about your project. We match them with vetted manufacturers and send you up to 3 suitable Space Capsule Tiny House price quotes for free.

  • Free & non-binding
  • SSL-encrypted
  • Reply within 24 h
Step 2 of 5 · about 20 seconds left until your offersSpace Capsule Tiny House

Do you already own a plot?

Personal reply within 24 hours

In brief

A space capsule tiny house – often also called a capsule house or capsule dwelling – is a factory-prefabricated, compact capsule or cube living unit in a futuristic spaceship design, delivered ready to the installation site according to manufacturer information. Documented footprints range from around 8 m² (compact egg-shaped capsule) to about 38 m². Currently only the Slovak manufacturer Ecocapsule quotes public EUR prices: from approx. €55,000 for the 25 m² Box Classic and approx. €99,000 for the egg-shaped micro unit with around 8.2 m² – in each case as manufacturer information, plus transport, foundation/pitch and connection. The other manufacturers (Armadilla, GLAMNI, Moving Castle, Nestron) do not quote public EUR prices for their models; here it is “on request”. For permanent living in Germany, the permit and pitch must be clarified with the responsible building authority in accordance with the respective state building code.

What a Space Capsule Tiny House as a prefab home costs – the overview

With the Space Capsule Tiny House, the living unit is built almost entirely in the factory: it is delivered largely finished and set up and connected on site in a short time. A binding fixed price ex works makes the calculation predictable – the plot or pitch, foundation, transport, crane and utility connections, however, always come on top.

Important with this special building form: classic new-build funding programmes for residential buildings (such as the KfW loans) require a permanently approved residential house with a proven energy standard – many Space Capsule Tiny House models do not meet this automatically. Therefore clarify the building rights at the installation site and possible funding eligibility before ordering.

This speaks in favour on price

  • Binding fixed price – calculable from the start
  • Very short installation time – ready to move in often within a few days
  • High degree of prefabrication – hardly any weather risk on the building site
  • Relocatable depending on the model – a change of location remains possible

This drives the price up

  • Transport, crane and foundation come on top of the purchase price
  • Pitch, site development and building rights must be clarified in advance
  • Classic new-build funding (e.g. KfW) often does not apply

Putting per-square-metre costs and the total price 2026 in context

The price for a Space Capsule Tiny House project in prefab construction depends above all on the area, specification and usage requirements. From approx. €55,000 plus incidental costs is a realistic starting price for the basic version (as of 2026).

In addition to the pure house price, factor in the incidental building costs (around 15–20 % of the construction sum), earthworks and a buffer. With our cost calculator you can determine your individual total price. How each price factor works is shown on the Prefab house prices 2026 page.

Public EUR prices for a space capsule tiny house are currently quoted only by the manufacturer Ecocapsule (Slovakia): from approx. €55,000 for the Box Classic (25 m²) and approx. €99,000 for the egg-shaped micro unit (around 8.2 m²). Both values are manufacturer figures, plus transport/foundation/connection. For the other documented size classes, no public prices are available (“on request”). The following table classifies the documented footprints:

Price ranges for Space Capsule Tiny House as a prefab home 2026 by living space and segment
FootprintPrice (manufacturer figure)Source / modelNote
approx. 8 m²approx. €99,000 (manufacturer figure)Ecocapsule (egg shape)plus transport/foundation/connection
approx. 11–13 m²on requestArmadilla The Pod, Ecocapsule Box XSno public EUR price
approx. 18–25 m²from approx. €55,000 (manufacturer figure)Ecocapsule Box Classic (25 m²)plus transport/foundation/connection
approx. 30–32 m²on requestGLAMNI X50, Nestron Cube Twono public EUR price
approx. 37–38 m²on requestEcocapsule Box XL, Moving Castle A7no public EUR price

Only Ecocapsule quotes public EUR prices (Box Classic approx. €55,000, egg shape approx. €99,000) – in each case a manufacturer figure. In every case, the following are added: transport and, where applicable, crane assembly (the units can weigh several tonnes), a foundation or prepared pitch, utility connections (water, sewage, electricity) as well as, for manufacturers outside the EU, additional import and customs costs. For permanent living, permit requirements and pitch requirements apply in accordance with the respective state building code – please clarify with the responsible building authority. As of 2026.

Space Capsule Tiny House: images, views and floor plan

This is what a typical Space Capsule Tiny House looks like: the visualisations show all four exterior views, the top view with solar panel, the living area with panoramic glazing, the bedroom as well as a sample floor plan with living area, kitchen, bathroom and bedroom. These are design visualisations of a typical capsule unit, not manufacturer photos of a specific model.

Space Capsule Tiny House front view – rounded living capsule with panoramic glazing and illuminated steps (visualisation)
Front view: rounded capsule shape with panoramic glazing
Space Capsule Tiny House left side view – glass front, entrance door and wooden terrace by the lake (visualisation)
Left side view: glass front with entrance door
Space Capsule Tiny House right side view – glazed living area in a futuristic capsule shell (visualisation)
Right side view: glazed living area
Space Capsule Tiny House rear view – closed, aerodynamic capsule shell in white (visualisation)
Rear view: closed capsule shell
Space Capsule Tiny House top view – solar panel on the capsule roof, wooden terrace alongside (visualisation)
Top view: solar panel on the roof
Space Capsule Tiny House interior living area – sofa landscape in front of a panoramic window with lake view and LED light strip (visualisation)
Interior living area: panoramic window and LED light strip
Space Capsule Tiny House interior bedroom – double bed in front of floor-to-ceiling glazing with mountain view (visualisation)
Interior bedroom: double bed with panoramic view
Floor plan of a Space Capsule Tiny House – living area with kitchen, central bathroom and bedroom in an elongated capsule shape (schematic)
Sample floor plan: living area, kitchen, bathroom and bedroom

Setting up a space capsule tiny house in Germany: pitch, permit, use

Whether as a guest house in the garden, holiday accommodation, glamping unit or office capsule: a space capsule tiny house is delivered as a finished unit by truck and, depending on the model, set up with or without a classic foundation. For permanent living, the same building law applies in Germany as for any other building – the decisive factors are the building code of your federal state, the development plan and the intended use. There is no blanket exemption from permits, not even below certain sizes.

In practice this means: before buying, you should clarify with the responsible building authority whether your plot permits a capsule living unit, which procedure applies (building permit, simplified procedure or permit-free) and what requirements exist for servicing, boundary distances and pitch. For delivery, an access route and, where applicable, a crane setup area must also be planned – individual models weigh several tonnes according to manufacturer information.

More on this: Capsule house & permit: the guide · Buying a capsule house: step by step

Space capsule vs. tiny house vs. container house: which compact housing form fits?

The capsule look is the unique selling point of the space capsule tiny house: rounded shapes, panoramic glazing and a fully styled interior from the factory. Anyone looking for more living space or classic rectangular floor plans is often more flexible with a tiny house on a foundation or a container house made of combinable room modules – both are also easier to realise in Germany with common construction methods and energy standards.

A price comparison is only possible to a limited extent, because most capsule manufacturers do not quote public EUR prices. As a guide: tiny houses from German providers usually start in the mid-five-figure range depending on the fit-out, container houses from around €65,000 (30 m²). With the space capsule tiny house, manufacturers outside the EU add transport, import and customs costs.

More on this: Tiny house: prices and building law · Container house: prices and construction method

Frequently asked questions about Space Capsule Tiny House prices

The key answers on prices, per-square-metre costs and price factors of a Space Capsule Tiny House prefab house in 2026.

What does a Space Capsule Tiny House in prefab construction cost in 2026?
The price starts in 2026 from approx. €55,000 plus incidental costs — calculated excluding plot and incidental building costs. How high the actual investment turns out depends on the area, specification and usage requirements. On Prefabricated House you can see the cost frameworks by area and finishing stage in a direct comparison.
What do the prices for a Space Capsule Tiny House in prefab construction depend on?
The price for a Space Capsule Tiny House project is shaped above all by the usable area, the technical specification and the required usage requirements (fire protection, structural design, site development). Thanks to serial prefabrication, the cost framework is calculable as a fixed price from the start – a clear advantage for financing and planning. You can find all cost factors in detail under house prices.
What is a Space Capsule Tiny House?
A Space Capsule Tiny House – also called a Capsule House or space-capsule house – is a factory-prefabricated, compact living unit in a capsule, egg or cube shape with a futuristic spaceship design. According to manufacturer information, the units are usually built in steel-frame construction with several insulation layers and delivered ready to the installation site. Footprints range from around 8 m² (compact egg capsule) to about 38 m². Capsule Houses are often marketed as stand-alone, sometimes off-grid units – for example for tourism, glamping or as additional space. For permanent living in Germany, building rights and site development are required.
How does a Capsule House differ from a Tiny House and a container house?
All three are compact, often transportable forms of living, but differ in building shape and concept: a Capsule House typically has a rounded capsule or egg shape or a cubic single cell and is delivered as a finished unit – often very small (around 8 to 38 m²) and sometimes off-grid. A Tiny House is a mini house that can stand stationary on a foundation or mobile on a trailer. A container house consists of container-shaped, mostly rectangular room modules that can be combined into larger living areas. You can find details on our pages about the Tiny House and the container house.
Does a Capsule House need a permit and a pitch in Germany?
As a rule, yes – but a blanket statement is not possible, because building law in Germany is a matter for the federal states. Whether and in which procedure a Capsule House must be approved depends on the respective state building code, the development plan and the intended use (permanent living, holiday or commercial use). The requirements for the pitch or plot also differ regionally. Before buying, clarify bindingly with the responsible building authority which permits, setback areas and site-development prerequisites apply at your specific location.
What does a Capsule House cost including additional costs?
Currently only the manufacturer Ecocapsule from Slovakia states public EUR prices: from approx. 55,000 euros for the Box Classic (25 m²) and approx. 99,000 euros for the egg-shaped micro unit (around 8.2 m²) – each as a manufacturer figure. The other verified manufacturers (Armadilla, GLAMNI, Moving Castle, Nestron) do not disclose public prices; quotes are provided on request. In every case, additional costs come on top of the pure purchase price: transport and, where applicable, crane assembly, foundation or a prepared pitch, utility connections (water, sewage, electricity) as well as – for manufacturers outside the EU – import and customs costs.
How are Capsule Houses delivered and set up?
According to manufacturer information, Capsule Houses are factory-prefabricated and transported by lorry to the installation site; some models are thereby mobile and relocatable. Depending on the manufacturer, no classic foundation is needed for installation – Nestron, for example, states that a level subsoil is sufficient as a prerequisite. The transport weight must be considered: for the GLAMNI X50 model, around 8 tonnes are stated for a 30 m² footprint and dimensions of 9,100 x 3,300 x 3,400 mm, so a crane is often required for placement. The specific requirements for access, subsoil and crane depend on the respective model.
How is a Space Capsule Tiny House laid out inside?
Typical capsule units in the mid-size segment (around 25 to 38 m²) are divided lengthwise: at one end lies the living area with sofa, panoramic glazing and a kitchenette, in the middle follow the bathroom and technical services, at the other end the bedroom. Smaller capsules under 15 m² combine living and sleeping in one room. Our floor-plan visualisation on this page shows such a typical room layout; the specific floor plans differ depending on manufacturer and model and can be taken from the respective data sheets.
Are Capsule Houses winterproof and usable year-round?
That depends on the model and can only be assessed according to manufacturer information. As building materials, manufacturers cite, among other things, aluminium external wall panels, polyurethane insulation (for example 100 mm) and LOW-E insulating glazing, which are intended to support year-round use. Whether a unit is sufficiently insulated and heatable for your climate and permanent residential use should be checked before buying, based on the data sheets and manufacturer information on insulation, heating technology and glazing. A blanket assurance of winterproofing cannot be given.
TÜV Rheinland CERTIFIED – verified qualification, ID 0000038136

Personal qualification of our expert

Proven expertise

On your side: the expert team at Prefabricated House

Ihr TÜV-zertifizierter Fachmann rund um Fertighaus-Preise

  • TÜV Rheinland-certified qualification
  • Manufacturer-independent guidance
  • Certified expert
Meet the experts